Search Data.gov
Found 938 dataset(s) matching "manufacturers".
-
The Large Amplitude Motion Platform (LAMP) at the National Renewable Energy Laboratory (NREL) Water Power Technology Validation Facility is a six-degree-of-freedom (6-DOF) motion platform intended...
-
A linear axis testbed at the Center for Intelligent Maintenance Systems (IMS Center) at the University of Cincinnati was run to failure (the detection of backlash) over one year with periodic data...
-
Standard Reference Material 131h Refined Cast Iron - This Standard Reference Material (SRM) is intended primarily for use in validation of chemical and instrumental methods of analysis. It can be...
-
This tool is used to implement Monte Carlo analysis, which uses probabilistic sensitivity analysis to account for uncertainty. This tool is developed to follow the simulation segment of ASTM...
-
The NIST STEP to X3D Translator is open-source software that translates a STEP (ISO 10303) Part 21 file (.stp or .step) to an X3D (ISO/IEC 19776) file (.x3d) or X3DOM file (.html). Developed at...
-
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. This repository includes Python code for analyzing and managing images and...
-
These images, videos, and tables show experimental data, where single lines, pairs of lines, and trios of lines of viscoelastic silicone inks were extruded into moving viscoelastic support baths....
-
This dataset contains data used in the investigation of Universally Unique Identifiers (UUIDs) that will enable a standards-based digital thread of product data in ISO 10303-242. Included are...
-
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. This repository includes Python code for analyzing and managing images and...
-
In embedded 3D printing, a nozzle is embedded into a support bath and extrudes filaments or droplets into the bath. Using OpenFOAM, we simulated the extrusion of filaments and droplets into a...
-
This document provides details on the experiment and associated measurement files available for download in the dataset ?In Situ Thermography During Laser Powder Bed Fusion of a Nickel Superalloy...
-
This challenge is to predict the macroscopic stress-strain response of compression samples across a range of temperatures taken from the base leg of the IN625 AMB2018-01 build in both the build...
-
This Photopolymer AM-Bench 2022 Challenge is to accurately model the relationship between photopatterned print fidelity and cure depth to exposure time with four resins, which serve to...
-
Specimens from one build of laser powder bed fusion (PBF-L) titanium alloy (Ti-6Al-4V) were split equally into two heat treatment conditions. The first condition is a non-standard hot isostatic...
-
Videos and .stl files from Synergistic Fire Resistance of Nanobrick Wall Coated 3D Printed Photopolymer Lattices.The videos are from the fire tests of 3D printed photopolymer parts, from which...
-
This challenge is a follow-on from AMB2022-01 laser powder bed fusion (PBF-LB) alloy Inconel 718 in the as-built condition (no heat treatment). Eight continuum-but-miniature tensile specimens were...
-
Supplementary Data for the paper "Three-Dimensional Particle Shape Analysis Using X-ray Computed Tomography: Experimental Procedure and Analysis Algorithms for Metal Powders" by E.J. Garboczi and...
-
A method was developed to reduce the point-based registration error by restoring the rigid body condition (RRBC method). Registration is the process of transforming one coordinate frame to...
-
Gas speed measurements using hot-wire anemometers (HWA) on a commercial laser powder bed fusion (LBPF) machine were recorded as a function of position (X, Y, Z) and nozzle type (standard and grid).
