Search Data.gov
Found 231 dataset(s) matching "test hole data".
-
The U.S. Geological Survey (USGS), in cooperation with the Lewis and Clark Natural Resources District (NRD), Lower Elkhorn NRD, Lower Loup NRD, Lower Platte North NRD, Lower Niobrara NRD, Middle...
-
This point dataset contains geologic information concerning regolith thickness and top-of-bedrock altitude at selected well and test-hole locations in and near the Lost Creek Designated Ground...
-
This dataset describes wells and test holes completed in the Deadwood Formation that were used to create the structure-contours for the top of the Deadwood Formation, Black Hills, South Dakota.
-
This dataset describes wells completed in the Inyan Kara Group that were used to create a potentiometric surface for the Inyan Kara aquifer.
-
**Overview** Sequences 8 and 9: Downwind Sonics (F,P) and Downwind Sonics Parked (P) This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed ranged from 5 m/s to 25...
-
**Overview** Sequences 8 and 9: Downwind Sonics (F,P) and Downwind Sonics Parked (P) This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed ranged from 5 m/s to 25...
-
**Overview** Sequence M: Transition Fixed (P) Test sequence M used an upwind, rigid turbine with a 0° cone angle. The wind speed ranged from 5 m/s to 15 m/s. Yaw angles ranged from 0° to 90°....
-
**Overview** Sequence X: Elevated RPM (F) This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed ranged from 5 m/s to 12 m/s, and yaw angles of ±30° were obtained....
-
**Overview** Sequence 7: Shroud Operating (P) This test sequence used a downwind, rigid turbine with a 3.4° cone angle. The wind speed ranged from 5 m/s to 25 m/s. Turntable angles from 0° to...
-
**Overview** Sequence W: Extended Blade (F) This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed ranged from 5 m/s to 21 m/s, and the yaw angle was held at 0°....
-
**Overview** Sequence V: Tip Plate (F) This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed ranged from 5 m/s to 25 m/s, and the yaw angle was held at 0°. The...
-
**Overview** Sequence R: Step AOA, No Probes (P) This sequence was designed to quantify the effect of the five-hole probes on the 3-D blade static angle-of-attack response in the presence of...
-
**Overview** Sequence 6: Shroud Wake Measure (P) This test sequence used a downwind, rigid turbine with a 3.4° cone angle. The wind speeds for this sequence corresponded to subcritical [7 m/s],...
-
**Overview** Sequence 5: Sweep Wind Speed (F,P) This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed was ramped from 5 m/s to 25 m/s by the wind tunnel operator....
-
This data release contains a set of permeameter test data collected in February and March of 2014 on the Cedar River near Cedar Rapids, Iowa. The permeameter tests were performed in proximity to...
-
**Overview** Sequence Q: Dynamic Inflow (P) This sequence was designed to characterize the dynamic inflow variation using the five-hole probes that extend upwind of the leading edge of the...
-
**Overview** Sequences S, T, and U: Upwind, No Probes (F); Upwind 2° Pitch (F); Upwind 4° Pitch (F) This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed...
-
**Overview** Sequences S, T, and U: Upwind, No Probes (F); Upwind 2° Pitch (F); Upwind 4° Pitch (F) This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed...
-
**Overview** Sequences S, T, and U: Upwind, No Probes (F); Upwind 2° Pitch (F); Upwind 4° Pitch (F) This test sequence used an upwind, rigid turbine with a 0° cone angle. The wind speed...
-
U.S. Geological Survey (USGS) in cooperation with the U.S. Air Force Civil Engineering Center conducted short-term aquifer tests at 11 wells to estimate hydraulic properties in the Fountain Creek...
