Search Data.gov
Found 33 dataset(s) matching "field injection test".
-
This submittal includes the field-test data collected during stress tests conducted in the Utah FORGE 16B(78)-32 wellbore to measure/characterize the stresses in the geothermal reservoir. The type...
-
This metadata record presents geochemical analytical data determined during laboratory experiments and a field pilot test collected during 2008-2010 to evaluate degradation of the cyclic nitramine...
-
Geothermal growth is limited by a lack of geographically dispersed high-temperature thermal resources and high initial upfront investment in characterization and well construction. This project...
-
This dataset contains final reports regarding stress measurements, permeability measurements, and mechanical properties from the core testing of well 58-32, in PDF format, and spreadsheets...
-
Water and gas chemistry data from: Benson, S.M., Janik, C.J., Long, D.C., Solbau, R.D. and Lienau, P.J., 1984. Data from pumping and injection tests and chemical sampling in the geothermal aquifer...
-
Subsurface data analysis, reservoir modeling, and machine learning (ML) techniques have been applied to the Brady Hot Springs (BHS) geothermal field in Nevada, USA to further characterize the...
-
Subsurface microbial (biogenic) methane production is an important part of the global carbon cycle and has resulted in natural gas accumulations in many coal beds worldwide. Laboratory experiments...
-
The EGS Collab project is developing ~10-20 m-scale field sites where fracture stimulation and flow models can be validated against controlled, small-scale, in-situ experiments. The first...
-
Information around the plug-and-perf treatment design at Utah FORGE by Fervo Energy. Objective and Purpose: - Develop a multistage hydraulic stimulation approach designed specifically to target...
-
The report details a thermal circulation test at Red Raider #2 at the Oil Field Technology Center (OTC) involving staged hot water injections and distributed temperature sensing (DTS) fiber optic...
-
Being relatively new to the field, electromechanical actuators in aerospace applications lack the knowledge base compared to ones accumulated for the other actuator types, especially when it comes...
-
This dataset contains 1-second and hourly resolution water flow rate, pressure, temperature, and electrical conductivity data collected during Test 1 of the DEMO Fracture Thermal Energy Storage...
-
MODFLOW-2005 groundwater flow models and MT3DMS solute transport models were developed to represent conditions in the vicinity of a bioremediation experiment conducted in fractured rocks...
-
We developed a methodology to estimate maximum CO2 injection rates in subsurface layers across wide geographic areas using inverse modeling-based optimization techniques. We first defined...
-
The U.S. Department of Energy's (U.S. DOE) Frontier Observatory for Research in Geothermal Energy (FORGE) is a field laboratory that provides a unique opportunity to develop and test new...
-
Geothermal power plants typically show decreasing heat and power production rates over time. Mitigation strategies include optimizing the management of existing wells - increasing or decreasing...
-
Includes data for measured inert tracer breakthrough curves first reported in Hawkins (2020) (Water Resources Research). In addition, this submission includes the production well temperature...
-
This submission contains the presentation slides and recordings from the first 98 EGS Collab Modeling and Simulation Working Group teleconferences. These teleconferences served three objectives...
