Search Data.gov
Found 98 dataset(s) matching "Heat Load".
-
The ResStock Analysis Tool was developed by NREL with support from the U.S. Department of Energy to provide a new approach to large-scale residential analysis by combining large public and private...
-
Heat load, a unitless value from 0 (low incident radiation) to around 1 (high incident radiation), is calculated using aspect, slope, and latitude (McCune and Dylan 2002 ). For the purposes of the...
-
This data includes results on an analysis of existing and projected energy, cost, and carbon for the City of Ann Arbor - District Geothermal Design and Deployment to Equitably Decarbonize Low...
-
This file contains a zipped file that contains many files required to run GEO2D. GEO2D is a computer code for simulating ground source heat pump (GSHP) systems in two-dimensions. GEO2D performs a...
-
Relationships of temperature and CNT mass (SWCNT, MWCNT, MWCNT-COOH) were developed for three environmental matrices (sand, soil and sludge) spiked with known amounts of different types of CNTs...
-
The purpose of this document is to describe the contents contained within Geothermal Data Repository (GDR) node of the National Geothermal Data System (NGDS) that serves as the final report for...
-
This dataset includes HVAC Hardware-in-the-Loop (HIL) experimental results for a single stage, SEER 16, HSPF 9.5, 3-ton single-speed air source heat pump with 15 kW of backup auxiliary heating...
-
This dataset contains materials from the Coalition for Community-Supported Affordable Geothermal Energy Systems (C2SAGES) project, which evaluated the techno-economic feasibility of a community...
-
Heat load, a unitless value from approximately 0 (low incident radiation) to around 1 (high incident radiation), is calculated using aspect, slope, and latitude (McCune and Dylan 2002 ).
-
This dataset was created to model the anticipated heating load of a geothermal project in development for the historical site of Pilgrim Hot Springs, and adds to the history of geothermal studies...
-
Precipitation amounts, and frequencies are major regulators of soil heat-load profiles as the interval between rainfall events allows for increased heat storage during cloudless days. The extreme...
-
Precipitation amounts, and frequencies are major regulators of soil heat-load profiles as the interval between rainfall events allows for increased heat storage during cloudless days. The extreme...
-
This dataset contains raw mechanical data (strain, stress and strain rate curvesand initial temperatures) for compression experiments performed on aluminum alloy 6061-T6using the NIST pulse-heated...
-
Report on a formation thermal conductivity test that was performed on the geothermal test bore at Ulbrich Heights at 38 Louis Circle Lane in Wallingford, Connecticut. Data are applicable only...
-
TO3 2.1.6: Simplified Space Conditioning IBACOS anticipates that houses achieving 50% whole-house source energy savings with respect to the Building America 2010 Benchmark (Hendron and Engebrecht...
-
Hourly steam use data for all significant buildings from the fiscal year (FY) 2017 (1 July 2016 - 30 June 2017) are provided. The total annual campus heating load in FY 2017 was about 0.81...
-
This dataset provides topographic indices derived from 1 m resolution DEMs for sequoia groves in both Sequoia-Kings Canyon and Yosemite National Parks. All mapped sequoia groves in Sequoia-Kings...
